Spray Rails
Enlarged View	Wood Strip The spray rail is a triangular piece of wood attached to the bottom of the chine to direct the spray down. I put it on the bottom instead of the outside so it was not so easy to damage.
Enlarged View Top	Attach to Chine The spray rail is attached with epoxy/microballon mix and screwed in place.
Enlarged View Top	Trim with Plane The screws are removed and the rail planed flush with the side.
Enlarged View Top	Front View Ready for finishing with a coat of epoxy then epoxy primer.
Enlarged View Top	Faired Spray rail faired in and ready for primer. I used white pigment and epoxy for this to make it a little stronger. Microballons make it a little softer.
Enlarged View Top	Primed Primed and ready for topcoat